AGWA Versions
The AGWApro V0.5 Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | November 1, 2020 |
The AGWA 3.X Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | January 25, 2022 |
The AGWA 3.X Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | October 31, 2020 |
The AGWA 3.X Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | November 1, 2020 |
The AGWA 3.X Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | November 1, 2020 |
The AGWA 3.X Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | November 1, 2020 |
The AGWA 3.X Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | November 1, 2020 |
The AGWA 3.X Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | November 1, 2020 |
The AGWA 3.X Directory is also required.
Details
3.10.0
Add new K2/RHEM precipitation distributions that are selectable by spatial query/intersection.
Add validation to ensure that dataframe and DEM have the same projection.
Add validation to ensure Current and Scratch workspace environments are file geodatabases.
Reset geoprocessing environments when beginning delineation, discretization, parameterization, burn severity, and LCMT forms to ensure environments are not improperly set from previous/other geoprocessing.
3.9.5
In KINEROS2 Precipitation, the number of time steps input has been changed to time step duration.
Fixes bug Burn Severity Tool where the burn severity field was hard-coded to "Severity" instead of using the user-defined field.
Fixes intermittent bug in Delineation. Cause is unknown, but replacing the older IBasicGeoprocessor.Dissolve function with the Dissolve tool from ArcToolbox fixes the issue.
3.9.4
Add support for Complex slope to KINEROS2 batch parameterizations.
Fixes bug in Burn Severity Tool in ArcGIS 10.6 and newer.
Fixes bug where mean subwatershed elevation was used instead of minimum and maximum for determination of SWAT elevation bands in SWAT Precipitation.
Converts RasterHydrologyOpClass operations to use the Geoprocessor and the Hydrology toolbox from ArcToolbox.
3.9.3
In Burn Severity Tool, add conditional to check if burn severity layer and land cover layer are in the same projection
Create errors.txt file next to the MXD document whenever possible to record error logging. Otherwise, default to c:AGWAlogging.
Fixes bugs in KINEROS-Opus parameterizations resulting in invalid/incomplete/failed parameterizations.
Fixes bug in vegetation table when coping RHEM vegetation parameterizations.
Fixes bug that results in layers in the data frame intermittently not being found due to case sensitivity.
Fixes bug in SWAT simulation results where start and end dates give a fractional number of years simulated.
3.9.2
Fixes bug in flow length discretization methodology when used with internal pour points.
Fixes bug in slope table when copying different KINEROS2 parameterizations.
Fixes bug in slope table when copying different RHEM parameterizations.
Fixes bug in disturbance parameterization when polygons fall outside the watershed.
Fixes bug in disturbance parameterization where KS was not modified correctly based on the modified porosity.
Fixes bug in SWAT2005 .RTE files where incorrect stream lengths were written.
Fixes bug for importing and viewing NP simulations for SWAT2000 and SWAT2005.
3.9.1
Fixes bugs in modifying SWAT climate via WGN files.
3.9.0
Updates RHEM parameterization equations to match 1/22/2015 Parameterization Equations document reflecting online RHEM version 2.3.
Fixes bug when parameterizing discretizations with DEM and flow direction rasters in File Geodatabases.
Fixes bug where tempSoilLut was not queried by PARNAME.
Fixes bug for batch SWAT simulations related to generating precipitation and using multiple WGN stations.
Fixes bug for writing SWAT input files where WGN files could be written incorrectly.
Fixes memory leaks leading to crashes encountered when parameterizing discretizations with thousands of elements.
3.8.3
Removes the use of batch files to execute models.
Changes the location from which models are executed from the simulation directory to the AGWAmodels directory.
Fixes bug in copying of slope table for group K2/RHEM parameterizations.
Adds support for importing, exporting, and visualizing results for K2 group watersheds.
Fixes bug in the symbology of AGWA created stream grid.
Allows Parameterizer form to be resized so it can be viewed/used on computers with Windows DPI scaling set to something other than 100%.
3.8.2
Changes the location from which the K2 model is executed from the simulation directory to the AGWAmodels directory.
3.8.1
Fixes bug in group element parameterization.
Fixes bug in Facilitator Export Tool.
Fixes bug in disturbance parameterization for K2.
Fixes bug in copying element parameterizations for K2 that was introduced in 3.8.0 with the addition of the complex slope parameterization.
3.8.0
Adds additional HGR relationships HGR selection based on physiographic map.
Adds baseflow configurations for K2.
Adds complex slope parameterization for K2.
Adds support for longer simulation names for SWAT2000 and SWAT2005.
3.7.0
Adds AGWA-Facilitator Export Tool.
Adds Disturbance Parameterization option to the Land Cover and Soils Paramaterization.
Fixes bug in Element Parameterization that assigned wrong Mean Elevations to Group Watersheds.
Improves robustness of Batch Parameterization.
Adds support for SWAT unweighted precipitation files that are not sorted by year and day of year for DBF, Personal Geodatabase, and File Geodatabase tables. Excel, CSV, and TXT tables still must already be sorted by year and day of year.
Adds support for additional raster types in Burn Severity Tool.
Fixes bug in extent of output raster from Burn Severity Tool.
Improves robustness of Burn Severity Tool.
Updates required file list in AGWA Home directory to require K2.exe instead of Kineros2_AGWA.exe.
Fixes bug that caused Element Parameterization to crash in some versions of ArcGIS due to bug in Polygon to Raster geoprocessing tool.
Improves robustness of splitting planes for KINEROS2 during discretization.
Fixes bug introduced in 3.6.5 that crashed KINEROS2 simulation/input file creation.
3.6.5
Minor UI changes to reflect that AGWA supports rasters of multiple formats and is not limited to the ESRI GRID format.
Fixes bug that caused Area of Interest Group Delineations to crash in ArcGIS 10.3.
Fixes bug introduced in 3.6.3 that crashed threshold-based discretizations when used with internal pour points.
3.6.4
Fixes bug when using CSV files for SWAT unweighted precipitation files.
Fixes bug in assignment of Storage IDs for K2 pond elements.
Fixes bug where a false positive was detected when comparing projections between delineations and land cover.
Increases the size of and fixed names of exported K2 hydrographs.
3.6.3
Fixes bug in user-defined hyetograph applied over a user-defined area.
Adds support and fixes bug for layers nested in Group Layers being moved to the top of the TOC.
Fixes minor UI bugs with SWAT Precipitation writing.
Fixes bug that prevents the buttons on the Discretizer form from being shown on screens with small vertical resolutions when DPI scaling is turned on.
3.6.2
Adds support for Group Layers in the Table of Contents.
Fixes bug that prevented Discretizer from being used when Base Layers were in the Table of Contents.
3.6.1
Fixes bug that prevented more than 1 character from being entered in certain textboxes.
Adds display of warning messages when inputs are outside of the expected range to the writing of Batch Simulations for KINEROS2.
Consolidates warning messages that are displayed when writing simulation input files into one pop-up dialog.
Removes the maximum size property of the Discretizer form, which was intermittently preventing the form from showing all of its controls.
3.6.0
Adds ability to add and associate KINEROS2 pond elements at nodes in the discretization.
Fixes the green checkmark in the Parameterizer form which wasn't being displayed indicating the form was ready to process.
3.5.0
Adds channel initiation points discretization methodology.
Adds updated results importing and exporting options.
Adds ability to rename layers in the Table of Contents, including AGWA delineations and discretizations.
Includes various bug fixes to improve stability and robustness.
3.4.1
Fixes bug associated with using the Group Delineator to fill the DEM and create the flow direction and flow accumulation rasters.
Fixes an incorrect Metric to English units conversion when importing results.
3.4.0
Adds existing network-based discretization option.
Adds English units as an option when viewing results.
| Date: | November 1, 2020 |
The AGWA 3.X Directory is also required.
Details
Maintenance release to improve reliability/robustness.
| Date: | March 23, 2012 |
The AGWA 2.X Directory is also required.
Details
Added WGN modification tool for SWAT.
Added ability to generate daily precipitation data using the SWAT weather generator.
| Date: | December 31, 2008 |
The AGWA 2.X Directory is also required.
Details
Added WGN modification tool for SWAT.
Added ability to generate daily precipitation data using the SWAT weather generator.
| Date: | December 31, 2008 |
The AGWA 2.X Directory is also required.
Details
Added WGN modification tool for SWAT.
Added ability to generate daily precipitation data using the SWAT weather generator.
| Date: | December 31, 2008 |
The AGWA 2.X Directory is also required.
AGWA Directory
Details
Updated October 30, 2020
Adds precipitation_distributions shapefile for K2 and RHEM regional precipitation distribution selection (precipitation_distributions.shp)
Adds precipitation_distributions_LUT for K2 and RHEM regional precipitation distribution selection (precipitation_distributions_LUT.dbf)
Updated June 29, 2017
Updated HGR.dbf to include all records in the physiographic shapefile (physio.shp)
Updated June 12, 2017
Adds physiographic shapefile for HGR selection (physio.shp)
Adds disturbance.lut for disturbance parameterizations for K2.
Updates K2 model executable to 20160623 version.
| Date: | October 30, 2020 |
AGWA Pro Tutorials
AGWA Tutorials
Details
Introduction:
In this exercise you will investigate the manner in which land cover changes over a 25 year period have affected runoff processes in SE Arizona.
Goal:
To familiarize yourself with AGWA and the various uses and limitations of hydrologic modeling for landscape assessment.
Assignment:
Run the SWAT model on a large watershed in the San Pedro River Basin and the KINEROS model on a small sub-basin using 1973 and 1997 NALC land cover.
| Date: | November 1, 2020 |
The GIS data download for "Land cover change and hydrologic response - San Pedro" is also required.
Details
Introduction:
In this exercise you will investigate the manner in which land cover changes over a 5 year period have affected runoff processes in/around Denver, CO.
Goal:
To familiarize yourself with AGWA and the various uses and limitations of hydrologic modeling for landscape assessment.
Assignment:
Run the SWAT model on a HUC10 watershed in the Middle South Platte-Cherry Creek HUC8 and the KINEROS2 model on a HUC12 using 2001 and 2011 NLCD land cover.
| Date: | November 1, 2020 |
The GIS data download for "Land cover change and hydrologic response - South Platte" is also required.
Details
Introduction:
In this exercise you will alter downloaded GIS layers to prepare them for use in AGWA.
Goal:
To familiarize yourself with the data management processes required to use AGWA in a BAER scenario.
Assignment:
Project, clip, and perform other necessary processes to GIS layers. These layers include a DEM, land cover, and soils.
| Date: | May 17, 2020 |
The GIS data download for "Data management tutorial in Palm Springs" is also required.
Details
Introduction:
In this exercise you will assess the impact of a wildfire on runoff and erosion in a burned watershed.
Goal:
To familiarize yourself with AGWA and its application for post-fire BAER scenarios.
Assignment:
Run the KINEROS2 model on both a pre- and post-fire scenario on a watershed burned by the 2013 Mountain Fire in the San Jacinto Mountains of California, and view the results.
| Date: | November 1, 2020 |
The GIS data download for "BAER process tutorial in Palm Springs" is also required.
Details
Introduction:
In this exercise you will use the Add Diversions tool to incorporate a constructed wetland adjacent to the outlet channel.
Goal:
To familiarize yourself with AGWA to analyze the impact of a common BMP in an urban setting within the South Platte River Basin.
Assignment:
Use KINEROS2 to assess the relative impact of constructed wetlands in an urban setting.
| Date: | November 1, 2020 |
The GIS data download for "Assessing constructed wetlands for development mitigation in Cherry Creek" and "Assessing detention ponds for development mitigation in Cherry Creek" is also required.
Details
Introduction:
In this exercise you will use the Add Storage tool to include constructed ponds along the main stem and tributaries of the urbanized watershed.
Goal:
To familiarize yourself with AGWA to analyze the impact of a common BMP in an urban setting within the South Platte River Basin.
Assignment:
Use KINEROS2 to assess the relative impact of constructed ponds in an urban setting.
| Date: | November 1, 2020 |
The GIS data download for "Assessing constructed wetlands for development mitigation in Cherry Creek" and "Assessing detention ponds for development mitigation in Cherry Creek" is also required.
Details
Introduction:
In this exercise you will characterize a stock pond and evaluate its impacts on runoff in a small watershed on the Walnut Gulch Experimental Watershed (WGEW).
Goal:
To familiarize yourself with AGWA and its application for watershed assessment where ponds/erosion control structures exist.
Assignment:
Run the KINEROS2 model on a watershed with and without a stock pond.
| Date: | November 1, 2020 |
The GIS data download for "Assessing the influence of ponds in Walnut Gulch" is also required.
Details
Introduction:
In this exercise you will identify all watersheds affected by a fire and you will assess a simulated fire treatment on a burned watershed using the Land Cover Modification Tool.
Goal:
To familiarize yourself with the Area of Interest delineation feature and with the Land Cover Modification Tool for use as a fire treatment analysis tool.
Assignment:
Identify watersheds affected by a fire. Run the KINEROS2 model parameterized with post-fire land cover, then modify the land cover using the Land Cover Modification Tool to parameterize the models with treated, post-fire land cover.
| Date: | November 1, 2020 |
The GIS data download for "BAER post-fire treatment tutorial in Marshall Gulch" is also required.
Details
Introduction:
In this exercise you will evaluate the impacts of a brush treatment in a semi-arid watershed.
Goal:
To familiarize yourself with RHEM and its additional input requirements.
Assignment:
Run the RHEM model in AGWA on both a pre- and post-brush treatment scenario on a small watershed on the Empire Ranch in southeastern Arizona.
| Date: | April 14, 2021 |
The GIS data download for "Evaluating brush management treatments on Empire Ranch with RHEM" is also required.
Details
Introduction:
In this exercise you will use group watersheds and modified land cover to investigate potential impacts of a residential and commercial development.
Goal:
To familiarize yourself with using group watersheds to model a study area that overlaps several watersheds and to learn how to simulate proposed land cover changes.
Assignment:
Run the KINEROS2 model parameterized with both pre-development and post-development land cover on a group watershed consisting of 5 individual watersheds.
| Date: | November 1, 2020 |
The GIS data download for "Whetstone land cover modification tool" and "Whetstone water harvesting tool" is also required.
Details
Introduction:
In this exercise you will modify channel parameters and add rainwater harvesting practices to simulate BMPS in a residential and commercial development.
Goal:
To familiarize yourself with advanced features useful for scenario planning.
Assignment:
Run the KINEROS2 model on a residential development and with a base scenario and again after modifying channel parameters and adding rainwater harvesting practices.
| Date: | November 1, 2020 |
The GIS data download for "Whetstone land cover modification tool" and "Whetstone water harvesting tool" is also required.
Version: 3.0
Details
Title: Model Sensitivity to Watershed Configuration and Land Cover Change - Suchiapa (in Spanish)
Introducción:
En este ejercicio, se examinará varias formas de representacion de elementos en una cuenca, y como éstos pueden alterar los resultados del modelo KINEROS2. Se utilizará KINEROS2/AGWA para modelar el cambio en el uso del suelo agrícola.
Objetivo:
Familiarizarse al estudiante con el funcionamiento de KINEROS2 y la modelación hidrológica.
Lección:
Ejecutar el modelo KINEROS2 en una sub-cuenca del Río Suchiapa con varias configuraciones y comparar los resultados.
| Date: | June 29, 2015 |
The Descarga de datos SIG para "Susceptibilidad del modelo a la configuración de la cuenca y cambios en el uso del suelo - Suchiapa" is also required.
Details
Introduction:
In this exercise you will attempt to calibrate KINEROS2 to match an observed hydrograph of a channel in an upper portion of the Río Suchiapa.
Goal:
To familiarize yourself with calibrating KINEROS2 in AGWA using multipliers and batch simulations to match an observed hydrograph.
Assignment:
Run the KINEROS2 model using batch simulations with a suite of multiplier files to match an observed hydrograph.
| Date: | June 29, 2015 |
The Input for the "Calibrating Hydrographs Using Multipliers - Suchiapa" tutorial (the output from the ""Susceptibilidad del modelo a la configuración de la cuenca y cambios en el uso del suelo - Suchiapa (En Español)" tutorial) tutorial must be completed first, or you may download the output from that tutorial directly: Supporting files for the "K2 Extracting Subwatershed And Adding Pond" tutorial.
Details
Introduction:
In this exercise you will use ICLUS (Integrated Climate and Land-Use Scenarios) data to investigate the manner in which land cover changes can affect runoff processes in the Cherry Creek watershed, Colorado.
Goal:
To familiarize you with AGWA to analyze ICLUS land cover data for predictive hydrologic modeling for landscape assessment.
Assignment:
Build land cover grids for 2020 and 2100 from the ICLUS A2 scenario in ArcMap for input into AGWA, and use it to run the SWAT model on the Cherry Creek watershed.
| Date: | April 16, 2015 |
The GIS data download for "Assessing Alternative Futures Using ICLUS Data - Cherry Creek" is also required.
KINEROS2 Tutorials
Details
Introduction:
In this exercise you will modify KINEROS parameter files and run KINEROS outside of the AGWA environment.
Goal:
To familiarize yourself with KINEROS input and output files.
Assignment:
Extract a subwatershed from a KINEROS parameter file, insert a pond element, subdivide a plane element into a cascade of planes, and adjust erosion parameters to reflect cover and management practices.
| Date: | June 29, 2015 |
The Supporting files for the "K2 Extracting Subwatershed And Adding Pond" tutorial is also required.
Details
Introduction:
In this exercise you will modify a KINEROS2 parameter file and run KINEROS2 outside of the AGWA environment.
Goal:
To familiarize yourself with KINEROS input and output files.
Assignment:
Subdivide a plane element into a cascade of planes and adjust erosion parameters to reflect cover and management practices.
| Date: | April 17, 2015 |
The Supporting files for the "K2 Cascading Planes" tutorial is also required.